Alas, this poor puppy was not in the best of shape when I got it. The handwheel and front plastic nameplate
got cracked in shipment. I’ve glued the handwheel back together, and have located another nameplate
(visible on the table in front of the machine). Also, it was missing the slide plate. The slide plate I have in the
machine now is the wrong one, but at least it’s keeping the gunk out of the bobbin case.
Also, note once again the bobbin winder on top of the machine, and, since this is a free arm, the lack of the
ability to set up as a treadle.
Here’s a closeup of the nameplate.
And, where the cams go.
Yea, it’s a free arm.
Here’s a closeup of the needle plate. Note the wrong slide plate.
You can also see the broken spring screw head segments on the left screw.
In the detachable base, there’s a place to store your accessories.
And, here’s looking at the bottom.
Return to Main page